Willig’s tank bodies for the transportation of lubricants offer low mixing volumes, optimised handling and a high capacity. They are suitable for the transportation of different types of product.
The tank body can be fitted with the following loading options:
The following discharger fittings are available:
Each measuring unit includes an oval gear meter, level indicator, pneumo-spool, gas display, overfill valve and the association suction and pressure hose. The hose bridge for the respective wet hose reel is stored in the rear cabinet or in the auxiliary cabinet at the front right and connected via feed pipes.
Our lubricant oil measuring systems for tank bodies offer a further benefit: With an especially low residual amount of below 1.9 l, you minimise the flushing loss when changing products.
The pumping equipment consists of a hydraulic, self-priming rotary pump with flame retarder. The material can be suctioned, back-flushed and discharged via the pressure-tight coarse filter.
The following electronics are included:
You can assign as many products as you like via an external storage device.
Heating
The goods being transported are prevented from cooling by as a hot-water heating system with two longitudinal heating ducts. It is generally installed in the side cover cabinet.
Insulation
The tank body can be fully insulated to suit the temperature conditions at the place of use if required.
The tank body can be fitted with additional safety and technical features:
If required, each tank body can be supplied with full ADR features for road-worthiness. Depending on the type of vehicle, you receive: